jack up trucks pictures
How to change brake pads on a 1996 Chevy S10 pickup?
I jacked up my car and remove the tires. I've tried to myself do and I've watched videos of how it works. But the brakes are different on my car helped, either. Let me say step by step, what I not be very grateful. (and if possible, can you give me links or pictures to show through me).
If you change the disc brakes, you must remove or two screws, then hold down the button. There are two tricks to remember is when you use the tweezers to remove remains a brake line have united him, not let it hang by the brake line to stop a cable tie or a piece of metal wire to get it while you work. Even before the elimination coatings age, you have to distribute the brake pads separated by compression of the brake piston. If it does before it can fall into the brake pads new, the new pads are thicker and means that you will not be able to slip on the rotor when you try to write again. Use everything you can spread Brake surfaces as a sturdy pair of pliers that you stick in his jaws, while not close, and separate the handles, to disseminate the tablets, which make an instrument, is all very well but do not. They are also a line in the rear brakes, which brake for parking, if you're wondering about that. Changing pads Braking is quite simple, there are only pills and sometimes stands little to help guide its supports. See also take the rotor and check to see how thick it is, if It takes a lot to the metal becomes thinner and thinner, to replace him.
2008 Silverado LT 4X4
